Well...The (almost) final plan!

[13secondcivic]

I should have my B16A1 w/LSD next friday. I contacted HASport for mounts...if anyone needs them, i'm taking orders at DEALER cost!...and got some nice JDM parts in. Here is what I plan on for the motor, unless something else comes about:

1. Intake Manifold: SKUNK2 - producing between 9 and 15 hp! and a good price!

2. Cams: SKUNK2 - producing 17hp! expensive, but worth the hp!

3. Header: HYTECH Exhaust - the best 1300.00 i'll ever spend add another 20+ hp.

4. Cam gears: Either SKUNK2 or TODA, not sure yet...a cam gear is a cam gear

5. clutch/flyhweel: Clutch Masters stageI and billet flywheel. If a pulley adds 2 hp, I can't even imagine what a 8lb flywheel will do! I'll say 8+?

6. Intake pipe: most likely AEM, unless there is something else out there I don't know about...hp? maybe 5?

so.....add these mods up, in addition to my current Thermal exhaust:

stock: 160hp
w/mods: 232hp we'll see


------------------
PERFORMANCE REFINISHING, Inc.
Home to all your High Peformance Honda needs!

visit us at http://performancerefinishing.8m.com

[gotatight92si]

good luck getting that kind of HP vince...a good stock b16 will put down about 140hp...give or take 5. how much are you planning on putting to the ground? maybe 190-200 or so if you're figuring on a very modest 232 flywheel. i'm very doubtful of those numbers, but i'm open to the dyno when do you plan on getting the parts in and on the dyno? i wish you the best of luck! i have an idea...how about you baseline the engine, and then run it with that god of a header you are describing elsewhere? then maybe some of us skeptics will consider it hehe. BTW, how much can you get some mounts for? i'm about to go b18c in my 91 si (WITH hydro tranny ) anyways vince, i wish you the best of luck and hope to hear how it all goes soon

------------------

[13secondcivic]

I get around 25% off of HASport list.


------------------
PERFORMANCE REFINISHING, Inc.
Home to all your High Peformance Honda needs!

visit us at http://performancerefinishing.8m.com